(Model # : UCH-236)


A. Product overviews :
1. Cool Traveler provides one 3-port USB2.0 Hub and one USB2.0 External all-in-1 Card R/W in one
    device to save the space for the users.
2. The standard product won’t have the nameplate on the top cover, and this will be depended on the
    customer’s OEM/ODM requirements.
3. There is the larger space between each Hub downstream ports and it allows to plug-in 3 USB Flash
    devices into Cool Traveler  with non-interference (please refer to the attached photo in right side).
4. Build in a small USB cable (around 15 ~ 20 cm length) on board and the mobile computer users
    don’t need to carry another extra USB cable when go to outside.
5. Provides one USB extension cable and suitable for the desk computer users.
6. Four multi memory card slots can be used at the same time for data exchange between each memory
    card.
7. The true user-friendly design as the icon supporting on computer screen for each slot that is the easy
    recognition of each card slots for the users.

B. Features :
    a. 3-port External USB2.0 Hub :
         1. Support both of Bus-power & Self-power modes. (Please see the below Notices D.)
         2. Plug-in 3 USB Flash devices into Hub with non-interference.
         3. Over-current protection of each port.
         4. Compatible with USB 2.0/1.1 devices..               
         5. Support high-speed 480 Mbps, full-speed 12 Mbps and low-speed 1.5 Mbps transfer rate.
         6. Chains up to 127 USB devices.
         7. Truly Plug & Play automatic system configuration. 
         8. Supports Win 98SE/ME/2000/XP ; Mac OS 9.2 or above.
         9. USB and ACPI compliant.
       10. UHCI and OHCI compatible.
　b. USB2.0 External all-in-1 Card R/W :
         1. Hi-speed 480Mbit/sec USB interface access to memory cards.
         2. Supporting various memory cards in the world so far : CF I/II, CF Ultra II, CF Extreme III,     
             IBMâ Micro Drive, SM, SD, mini SD (need adapter), SD Ultra, MMC I/II, RS MMC, HS-MMC,
             MS, MS-Pro, MS-Duo (need adapter), MS Magic, MS Magic Pro, MS Pro-Duo (need adapter), 
             MS Magic Duo (need adapter), MS Magic Pro Duo (need adapter), XD, TransFlash (need
             adapter).
         3. Four slots can be used at the same time for data exchange between each memory card.
         4. Work with Bus-powered, no external power supply required. (Please see the below Notices D.)
         5. Supports Win 98SE/ME/2000/XP ; Mac OS 9.2 or above.

C. Specifications :

D. Notices :
When the users want to use USB2.0 Hub and all-in-1 Card R/W at the same time in Cool Traveler and or want to connect the high power USB devices with USB2.0 Hub in Cool Traveler, our standard USB power cable or standard external Switching Power Adapter (option item) may be required.